Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ Tech Forum (
-   -   Need Help, Engine Bay Fuse Box Power Lug Snapped Off (

XDR 05-15-2013 06:31 PM

Need Help, Engine Bay Fuse Box Power Lug Snapped Off
In the middle of rewiring for my engine swap and this piece snapped off while removing nut. Any ideas on a fix or easy way to replace?

XDR 05-15-2013 06:35 PM

2 Attachment(s)

flflash 05-15-2013 06:37 PM

Owww the whole blade broke off, looks like you might be salvage yard bound.

XDR 05-15-2013 06:50 PM

1 Attachment(s)
Got the plate removed from the fuse block..

n00g7 05-15-2013 07:01 PM

3 Attachment(s)
Nice rusty bolt. Drill a hole in that metal bracket thing, bolt something like this: Ground Strap Braided, Tinned Cu, 4 ga, 18in - onto it. Position the bolt point so the other end of the braid comes out where expected. Solder the braid to that metal part that goes in the fuse box to make a solid connection. Then make some sort of bracket to hold the terminal end in place. Or buy the whole part online/junkyard hunt.

XDR 05-15-2013 07:08 PM

Good idea, I think I'm going to find one from a part out and just replace the plate as it came out fairly easy.

XDR 05-16-2013 09:58 AM

Just ordered a new box from daveys

All times are GMT -5. The time now is 06:56 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.