I just got my lock right locker for my front Dana 30 axle. Just putting a feeler out to see if anyone with some experience is willing to help me out.....BTW, I'm about 9 miles outside of scranton
05-17-2013 09:30 PM
not that hard of an install, while your at it put new seals in, I didnt while i was in there and need to pull it all apart again.
05-17-2013 10:40 PM
Inner axle seals? Pick them up at any auto parts store?
06-06-2013 12:44 PM
Any luck with that install yet?? Its easy to do I put one in my mud racer
06-06-2013 01:54 PM
I put an aussie in last week not too hard. Just make sure you have a vice and a long punch to get the pin out of the pinion shaft
06-06-2013 03:03 PM
Yea an ausse is just like a lock right its a nice steet friendly locker
06-07-2013 09:46 AM
Thanks for the replies and sorry I haven't posted back. I got it installed. Was easy once I figured out I had a split shaft on the passenger side lol. I was tugging at that carrier for a long time before a friend came over and told me about the other part of the axle that had to come out. Locker works great, places I used to get stuck are no match now :)