I have a 06jeep wrangler and the turn signals don't work. I replaced the fuse still nothing. The turn signals don't even light up on the dash. What should I do next? Thanks for the help
05-19-2013 10:47 PM
How about the emergency flasher does it work??? If so and all the lights work it is the flasher remove and replace or try swapping the flasher relay in the fuse panel. I have an 89 so I have no idea what you fuse panel works but it should be the same principle since nothing happens at all. Both the flasher relay for turn signals and the emergency flashers should be next to each other. Check it out see what you find.
05-20-2013 01:11 AM
The emergency flashers do not work. I think I'm going to have to take it in. I will replace the bulbs tomorrow and if that doesn't work ill take it in. All my other lights work fine
05-20-2013 09:37 AM
You might want to ask this in the TJ forum, you'll get a lot more views.
05-20-2013 11:37 AM
What was the last thing you did when they worked?
If you have a circuit tester I would suggest trying that and run backwards until you find am issue.