Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   Need proper bolt for front Track bar (http://www.wranglerforum.com/f210/need-proper-bolt-for-front-track-bar-244116.html)

1997 05-21-2013 12:51 PM

Need proper bolt for front Track bar
 
I have destroyed this bolt and need to replace the OE front track bar bolt on the axle side.

Looking to put a hex back in.

Thanks guys.

s14sh3r 05-21-2013 01:28 PM

SCREW, Truss Head, M10x1.5x75, Track Bar to Axle, Mounting, part number 06503981

UnlimitedLJ04 05-21-2013 01:37 PM

I use a M10x1.5x75mm Class 12.9 (8mm allen drive) because it can be torqued to a higher value to prevent hole wallowing. You can use a Class 10.9 flange nut on the back if your flag nut is jacked up.


All times are GMT -5. The time now is 05:53 PM.