Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Ohio Jeep Forum (http://www.wranglerforum.com/f85/)
-   -   50' led (http://www.wranglerforum.com/f85/50-led-244432.html)

upin1212 05-22-2013 05:58 PM

50' led
 
I have question? can you just use the mounting brackets that come with the led light and drill them into your windshield frame?

Sinister6 05-22-2013 06:08 PM

That's a BIG LED!

upin1212 05-22-2013 06:16 PM

50 inch lol

Sinister6 05-22-2013 06:25 PM

LOL been there done that!

I'd be hesitant , ESP with a 50" LED. Expensive, heavy...hate to have that thing break free heading down the hwy after a day of wheeling!

upin1212 05-22-2013 06:30 PM

think a bracket screwed into the side maybe 4inces long and bent to fit? I really don't see the sense in a $200 set of mounts that go all the way up the sides.

Sinister6 05-22-2013 06:59 PM

It's your light bar...$200 for mounts compared to a new light bar and then mounts. When I got mine I thought the same thing about mounting it directly.

Sinister6 05-22-2013 07:02 PM

Damn phone! Then when I started thinking about wash board roads, rock crawling and the physical forces that will affecting the mounts...I very quickly decided against it! Good luck with whatever you decide!

upin1212 05-22-2013 09:45 PM

Quote:

Originally Posted by Sinister6 (Post 3783207)
Damn phone! Then when I started thinking about wash board roads, rock crawling and the physical forces that will affecting the mounts...I very quickly decided against it! Good luck with whatever you decide!

Thanks. I'm still thinking. I also don't have the bar that screws in the windshield thus I have that bolt still in there so I was thinking use that to hold bracket as well as 2 through the side. I don't know we shall see.

upin1212 06-03-2013 09:31 AM

1 Attachment(s)
Quote:

Originally Posted by upin1212 (Post 3783864)

Thanks. I'm still thinking. I also don't have the bar that screws in the windshield thus I have that bolt still in there so I was thinking use that to hold bracket as well as 2 through the side. I don't know we shall see.



Attachment 257164

The 50 fits perfect on it.


All times are GMT -5. The time now is 07:01 AM.