Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   What do I have? (http://www.wranglerforum.com/f282/what-do-i-have-244543.html)

skyhawkap 05-23-2013 07:16 AM

What do I have?
 
I need help figuring out what I have. I Just bought my Jeep (one week ago). I was looking for specific things when I bought (clean frame, 4.0, etc.). The problem is that I think I need to replace my transmission mount and/or ujoints due to a clunk sound when shifting between 1,2 and 3rd gear. The jeep has a lift on it so I don't think it is the stock mount. If it is the stock one...no problem however, if it is not I don't know where to start looking for the right one.

I was also hoping I could get some help figuring out what else I have (type of lift, components, etc.) that were added which I may need to know about later. I can take more pics if needed. These are just random because I didn't know where to start.

This is the pressing issue...would this pan take a stock mount?
http://www.wranglerforum.com/attachm...131s_thumb.jpg

http://www.wranglerforum.com/attachm...132s_thumb.jpg

Front diff...
http://www.wranglerforum.com/attachm...117s_thumb.jpg

Front shock...
http://www.wranglerforum.com/attachm...116s_thumb.jpg

Back of front axle...
http://www.wranglerforum.com/attachm...129s_thumb.jpg

Rear axle...
http://www.wranglerforum.com/attachm...126s_thumb.jpg

Rear arms?...
http://www.wranglerforum.com/attachm...122s_thumb.jpg

Thanks!

yoopone 05-23-2013 07:52 AM

Can obviously see a Skyjacker shock. Transfer case has been lowered to facilitate some type of lift. Yes, that is the stock skid plate, it is just lowered. The oem trans mount will still work fine. Need better pictures of the control arms to tell what those are. It may be a Skyjacker lift all the way around.


All times are GMT -5. The time now is 06:03 AM.