Jeep Wrangler Forum

Jeep Wrangler Forum (
-   YJ Tech Forum (
-   -   Help with my 3.07 gears (

James.asaro 05-24-2013 10:18 AM

Help with my 3.07 gears
I just counted the ring and pinion teeth on my 1989 YJ Dana 30, and I have a 3.07 setup. I would like to move up to a 3.73 or even a 4.10, but here are my questions.

1) Will my current carrier work for a 3.73 or higher?
2) Will a 3.73 or higher fit into the Dana 30 I have with 3.07 currently installed?
3) How do I determine if I have a standard for reverse rotation?

I assume the carrier probably won't work, so that being the case, does anyone have a recommendation for a locker. I was looking at a EATON E-locker.



roadyrob 05-24-2013 10:24 AM

you will need a new carrier for the higher gears. yes 3.73 will fit in the d30 with the correct carrier, i believe the max is 4.88. yj's are high pinion and reverse rotation.

James.asaro 05-24-2013 11:08 AM

The rear Dana 35 is standard rotation non-c clip right?

jokerchief462 05-24-2013 12:49 PM

1989 is non C clip correct

All times are GMT -5. The time now is 12:23 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.