Jeep Wrangler Forum

Jeep Wrangler Forum (
-   JK General Discussion Forum (
-   -   Power Window Issues (

Deuble 05-24-2013 05:06 PM

Power Window Issues
The rear driver's window in my 2008 Jeep Wrangler Unlimited will roll down but now back up. The front switch does not work for that window at all (it works fine for the other three) and the back switch will roll the window down but not back up. I have tried the turn it off and then turn it back on again trick and that doesn't work. I have also reset the ecu and that did nothing. If I connect a 12v power source directly to the motor the window will roll back up so it's not the motor. I've been :banghead: for two weeks now trying to figure this out. Any help would be greatly appreciated!!

SilverSport 05-24-2013 08:09 PM

1 Attachment(s)
Welcome Aboard! :wavey: Perhaps this will help.

mattdenney07 01-05-2014 03:50 PM


Originally Posted by SilverSport (Post 3790353)
Welcome Aboard! :wavey: Perhaps this will help.

Sorry to bump an old thread, but this helped me out a ton. SilverSport, where did you get this wiring diagram? Also, are there diagrams like this for more systems in the JK? They need to be made public if they exist!

All times are GMT -5. The time now is 06:16 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.