Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   Console question (http://www.wranglerforum.com/f210/console-question-245607.html)

tyback 05-28-2013 03:55 PM

Console question
 
I've got a 97 TJ with the small console. I've found a full console from a 2000 model. Will it fit my 97?

Big Sarge 05-28-2013 04:03 PM

yes

TJ_John 05-28-2013 05:45 PM

I haven't done it, but I'm toying with the idea. I was told you needed to drill and insert some nutserts into the body so the rear cup holders had something to fasten to.

Big Sarge 05-28-2013 05:49 PM

Quote:

Originally Posted by TJ_John (Post 3801147)
I haven't done it, but I'm toying with the idea. I was told you needed to drill and insert some nutserts into the body so the rear cup holders had something to fasten to.

IIrc they did not have the rear cup holders until 2003 so the said 2000 console would not have them. That being said on my 98 full console (without rear cup holders) does not have machined screws holding it in. Self tapping screws would be more than sufficient.

TJ_John 05-28-2013 05:53 PM

Quote:

Originally Posted by Big Sarge (Post 3801165)
IIrc they did not have the rear cup holders until 2003 so the said 2000 console would not have them. That being said on my 98 full console (without rear cup holders) does not have machined screws holding it in. Self tapping screws would be more than sufficient.

Didn't know that. Thanks!


All times are GMT -5. The time now is 02:40 AM.