- - O2 Sensor Problem
||05-30-2013 12:42 PM
O2 Sensor Problem
So my YJ has the check maintenance light on. we know the O2 sensor is causing it. the problem is the sensor had ports for 4 wires and we have 3 wires that have been cut in the proximity of the O2 Sensor. Does anybody have a decent wiring schematic for it?
||05-30-2013 01:44 PM
no schematic... but, check your donut gasket where the manifold and pipe come together. If bad, it will be a little noisy under the hood and will also throw a bad reading to the o2 sensor. I was able to tighten mine back up and my o2 readings cleared.
|All times are GMT -5. The time now is 10:27 PM.
User Alert System provided by
Advanced User Tagging v3.1.0 (Pro) -
vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.