Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Vendor Spotlight! Great Deals for Members. (http://www.wranglerforum.com/f123/)
-   -   Something Simple, Weld Washers! (http://www.wranglerforum.com/f123/something-simple-weld-washers-246656.html)

Dan Fredrickson 06-02-2013 12:03 PM

Something Simple, Weld Washers!
 
These are some of the simple things that really come in handy when tying it all together. They will really add strength where you need it without adding unneccessary weight. Many will use them with the "V" edge down when using a MIG for easy penetration, I like them flat when I TIG for a clean, tight presentation thats just as strong.

http://www.ruffstuffspecialties.com/...rs%20close.jpg

These are 1020 steel but 7/32" thick so no need for Chromoly and if its not going to be heat treated why bother anyway....They are available with a 3/4", 5/8", 9/16", or 1/2" holes and are 6 for $10....

http://www.ruffstuffspecialties.com/...asher%2058.jpg

And for after the hole has already gone oblong here are our Fixit Weld Washers. They are a tad under 7/16 thick so they will last!

http://www.ruffstuffspecialties.com/.../fixitweld.jpg

Reinforcement Plates - RuffStuff Specialties

Dan Fredrickson 06-03-2013 01:36 PM

Something to always keep in mind when building a new rig!

Dan Fredrickson 06-04-2013 03:28 PM

These are a great trail fix tool too :)

Dan Fredrickson 07-15-2013 11:26 AM

Plenty in stock!

Dan Fredrickson 04-24-2014 09:14 AM

We want to make sure even the hard parts are easy to find!

Dan Fredrickson 08-06-2014 11:31 AM

It's the simple things that make the rig work!


All times are GMT -5. The time now is 07:02 PM.