Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Builders Corner (http://www.wranglerforum.com/f118/)
-   -   The Honey Badger Build (http://www.wranglerforum.com/f118/the-honey-badger-build-247233.html)

Joshlb13 06-04-2013 09:15 PM

The Honey Badger Build
 
2 Attachment(s)
I'm late on the start but here she is, I got her stock besides the rims and some bald Mickeys. I have big plans for her, and I guess I'll use this to track my progress. I try and keep most parts homemade, and done by myself

Joshlb13 06-04-2013 09:18 PM

1 Attachment(s)
Before the new front bumper and snorkel, and eight after I cut up the stock flares

Joshlb13 06-05-2013 08:41 PM

2 Attachment(s)
Installed a cb today, not too sure where to mount the radio though, any suggestions??

sparkyjeep 06-06-2013 12:35 PM

i cut a section out of the front of the console and mounted mine on the dash infront of the console on the driver side. mounted the mic to the dash panel next to the center dash bezel. easy to reach both and for the most part its out of the way.

Joshlb13 06-06-2013 06:02 PM

Awesome, pics??

Joshlb13 06-06-2013 07:01 PM

Quote:

Originally Posted by sparkyjeep (Post 3832302)
i cut a section out of the front of the console and mounted mine on the dash infront of the console on the driver side. mounted the mic to the dash panel next to the center dash bezel. easy to reach both and for the most part its out of the way.

It sounds like exactly what I want to do, but I don't have any idea on how to do it, I'd really love to see some pics if you have them:)

BigEZ 06-06-2013 11:37 PM

tuffy has a bracket which goes front-back from the windshield to the roll bar. Shouldn't be too hard to fab one with same dimensions.
Rugged Ridge sells a dash mount bracket for like $25 on amazon.

Joshlb13 06-07-2013 07:34 AM

Sounds good man, I'll check em put, I just kinda want to keep it lower so if I get caught on the rain atleadt it would have like the dash to keep some of the water off, but I really like the rugged ridge mount!!

sparkyjeep 06-08-2013 12:11 AM

my cb is out of the jeep right now, but i can get a pic of the cut console...

Joshlb13 06-08-2013 07:34 AM

Quote:

Originally Posted by sparkyjeep (Post 3838198)
my cb is out of the jeep right now, but i can get a pic of the cut console...

I would really appreciate that!

Joshlb13 07-13-2013 10:48 PM

2 Attachment(s)
Put on a winch and new bumper, I bought the whole set up for 300, I can't decide if I like the look or not yet though

A week ago I also mounted the cb

sporty_drew 07-14-2013 12:18 PM

I'm liking the new setup on the front. Looks like a great deal to me!

Joshlb13 07-14-2013 01:01 PM

Quote:

Originally Posted by sporty_drew (Post 3960967)
I'm liking the new setup on the front. Looks like a great deal to me!

Thank you! I bought the whole setup for 300 bucks!

steeze 07-16-2013 09:14 PM

Love the front setup you've got going..

Joshlb13 07-16-2013 10:05 PM

Quote:

Originally Posted by steeze (Post 3970197)
Love the front setup you've got going..

Thanks, I'm selling the kcs on the front and plan on putting a 12 inch light bar in the middle, and smaller led floods on the outer mounts


All times are GMT -5. The time now is 07:09 PM.