Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Georgia Jeep Forum (http://www.wranglerforum.com/f70/)
-   -   Welder needed... (http://www.wranglerforum.com/f70/welder-needed-247254.html)

CPT_D 06-04-2013 11:34 PM

Welder needed...
 
I think I'm going to go ahead and sleeve and gusset my from axle and I was hoping that I could find a welder on here that, 1. is a great welder and 2. knows how to do this.

Thanks,

Shane

cleveland99 06-05-2013 01:33 AM

Go check out James from the toccoa ride he might be able to help you out plus he local to you Just a idea and I am sure someone this weekend at mm can help for sure

kappaknight 06-05-2013 08:45 AM

I'd do truss and gusset over sleeve and gusset.

colbert1775 06-05-2013 06:13 PM

Also looking to do the same thing on my dana30, kit from Artec is looking pretty good. Just not really looking to spend like $700 on a weld job....

Amanda30605 06-05-2013 07:38 PM

James number is 706-356-8111 if you want to talk to him about it.

CPT_D 06-05-2013 10:28 PM

Quote:

Originally Posted by kappaknight (Post 3827693)
I'd do truss and gusset over sleeve and gusset.

I priced a complete Artec truss/gusset set up for my front axle today... about $900... but that includes the complete removal of all components in the axle to prevent damage due to heat.

colbert1775 06-06-2013 12:10 PM

Was this from James or another shop? Local guy wants to charge 800 for install, so all around like 1400 ish if I do ball joints. When I look at it like that it makes me just want to wait a while and grab a ProRock 44. Already a freakin quarter of the way there anyway...

CPT_D 06-06-2013 11:17 PM

It was from a shop in (or close to) Athens.


All times are GMT -5. The time now is 05:54 AM.