Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Georgia Jeep Forum (http://www.wranglerforum.com/f70/)
-   -   need a Dana 35 for a yj (http://www.wranglerforum.com/f70/need-a-dana-35-for-a-yj-247698.html)

4bngrYJ 06-06-2013 08:52 PM

need a Dana 35 for a yj
 
I've had my yj for about two years. I've had a few problems here and there , but no I have two teeth broken off my rear pinion and track bar bracket on axle housing is broken. I would just put a ring and pinion in it , but I can hardly afford that. Do any of yall have an old one laying around. I am assuming mine is 4.10 since it is a manual 4* cyl. If anyone does have some other ratio and has front and rear that would work too. This is my daily driver and cash is very limited , so I just need to get it back on the road.

JD95YJ 06-08-2013 03:38 PM

You don't need the trac bar back there, or the one up front for that matter. As long as the gears are still stock, they are 4.10. Search around Craigslist or you may have to find a cherokee in a junk yard and go that route. If you're going to replace the whole rear end, don't go back with a D35. You can get one out of an explorer (Ford 8.8) say from pull-a-part for about $200. You can find one with 4.11 gears and that'll work and you'll have a lot stronger rear end with beefier axles.

jandaso 06-11-2013 12:19 PM

I have a D30 front and D35 for a TJ .... shoot me an offer and we can work something out. Not sure about the gears. but they are in working condition.


All times are GMT -5. The time now is 09:40 PM.