Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   transmission question (http://www.wranglerforum.com/f218/transmission-question-248250.html)

89Saharagreen 06-09-2013 05:35 PM

transmission question
 
1 Attachment(s)
I have a 88 with the peugeot transmission and I took off the plate and I want to know if this picture looks right.

It looks like an oil line going into the transmission from a reservoir up in the engine compartment mounted to the firewall near the steering and brake master cylinder.

Only problem is there is only one line coming from the reservoir to the transmission so why is this second line disconnected.

I am the third owner of this wonderful gem so I am finding lots of surprises by previous owners.

If it is normal fine but if it is not I need to know where this goes.

thanks

jokerchief462 06-09-2013 05:57 PM

Clutch slave cylinder hydraulic line. Enters on the drivers side through the bell housing. The bleed valve also exits through the bell housing some models on the driver side some on the passenger side.

89Saharagreen 06-09-2013 07:35 PM

transmission question
 
Great thanks

ok so should there be something attached to both lines or just one?

And is year specific as in 88 only have one line 89 have two or anything else you can tell me or point me to?

89Saharagreen 06-10-2013 11:23 AM

Anybody got an answer for me on this does the second line go some where or just terminate right there?

Would like to put my shifter boots and plate cover back on today if possible.

Thanks

Redrider94 06-10-2013 12:41 PM

Quote:

Originally Posted by 89Saharagreen (Post 3845001)
Anybody got an answer for me on this does the second line go some where or just terminate right there?

Would like to put my shifter boots and plate cover back on today if possible.

Thanks

It's the bleeder line, nothing attached to it. You're ok to put back together.

89Saharagreen 06-10-2013 06:53 PM

RedRider

thanks great news

Chief


All times are GMT -5. The time now is 06:48 AM.