Do I have to buy the cleaner or can I just clean off my frame sand it down and put that stuff on
06-16-2013 06:06 PM
I haven't used this product BUT there is alot of testimony on the forum that it works great. As for directions, I would suggest doing a search on here for POR-15 for details or check with POR-15's customer service on that... Sorry, just thought that product would help out.
06-16-2013 06:09 PM
I heard that stuff is great as well. I did not have a lot of rust so I undercoated mine with fluid film.... Time will tell. Good luck to ya'....:thumb:
06-16-2013 07:30 PM
Wire wheel, then sand, then treat(Eastwood internal frame treatment), prime and paint.
06-16-2013 07:32 PM
I just under coated my frame with rust bullet. Process was versus simple however only time will tell how it holds up to the winter saltings.
06-16-2013 07:49 PM
06-17-2013 08:33 AM
The POR 15 is a 3 step process. You should also buy the the marine clean metal cleaner and the metal prep products. Then after you have applied the POR 15 rust coating you should overcoat it with the chassis black, which will provide UV protection.