Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   Flexing with 2.5 lift (http://www.wranglerforum.com/f274/flexing-with-2-5-lift-250296.html)

DirtyTeddy 06-18-2013 10:31 PM

Flexing with 2.5 lift
 
3 Attachment(s)
Went to a close by clay mine and beat her up a little today.

Just wanted to post some pictures of what a 2.5 lift is capable of even without cut fenders. For my once or twice a week light wheeling its spot on but I already want a bigger lift (::

mountainneer 06-18-2013 10:36 PM

Cool pics...

PapaG 06-18-2013 10:55 PM

Oh yea that's sole nice flexing =D

traitor08 06-19-2013 06:51 AM

Doesn't look like you disconnected the sway bar.

ilikeguns 06-19-2013 08:23 AM

what.. no water?

what lift do you have now?

DirtyTeddy 06-19-2013 10:52 AM

Quote:

Originally Posted by ilikeguns (Post 3876894)
what.. no water?

what lift do you have now?

Haha no more ponds until a snorkels put on. And 2.5 TF shock and spring


Quote:

Originally Posted by traitor08 (Post 3876661)
Doesn't look like you disconnected the sway bar.

That'll be my next mod for sure, manual disconnects. I'm assuming that's why my rear driver is chilling in the air. Thought it was cool though

traitor08 06-19-2013 07:26 PM

Disconnects are a must to get a lot of flex.

DirtyTeddy 06-19-2013 08:12 PM

Quote:

Originally Posted by traitor08 (Post 3878878)
Disconnects are a must to get a lot of flex.

Any particular sets you know that don't require welding? If the better ones do, I could get those on as well when I reinforce the c gussets

cmaggi2 06-19-2013 08:18 PM

Quote:

Originally Posted by DirtyTeddy (Post 3879092)

Any particular sets you know that don't require welding? If the better ones do, I could get those on as well when I reinforce the c gussets

None require welding...

scottmphoto 06-20-2013 12:37 PM

JKS - 5 minute install. $130ish

flomingo 06-20-2013 03:22 PM

Quote:

Originally Posted by scottmphoto (Post 3881751)
JKS - 5 minute install. $130ish

These are definitely next on my list!


All times are GMT -5. The time now is 09:40 PM.