Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Vendor Spotlight! Great Deals for Members. (http://www.wranglerforum.com/f123/)
-   -   All our Different Weld Washers! (http://www.wranglerforum.com/f123/all-our-different-weld-washers-250746.html)

Dan Fredrickson 06-20-2013 11:41 PM

All our Different Weld Washers!
 
When we first came out with our Weld Washers 8 years ago they had been made by 20 other companies for years. They were great as a preventative measure when first building a vehicle because they are 7/32" thick but were not as good for repair's. The reinforce a good hole with more than 3/16" of additional steel and come in 1/2", 9/16", 5/8", & 3/4" to cover the bases for you.

http://gallery.ruffstuffspecialties....g?m=1371787923

Then 3 years ago we added the Fixit Weld Washers. They were primarily for repairing a hole that was already bad from use. They create a clean new bolt hole in 1/2", 9/16", 5/8", or 3/4" and all are 3/8" thick so you don't have to worry about what you fix!

http://gallery.ruffstuffspecialties....g?m=1371787922

Now just 2 weeks ago we came up with something else along these lines that in some ways is even cooler! Our Threaded Weld Washers. These are used to add something to your chassis in as easy a way you can that is strong enough to stand up to years of use and abuse. They are available for a 5/16", 3/8", & 1/2" thread bolts and require a 3/4" hole to be drilled for mounting so they can be added for anything down to a 1 1/4" Tube and of course any plate or sheet stock.

http://gallery.ruffstuffspecialties....g?m=1371787923

I seriously see these as something that should be on pretty much any fabricators shelf because there are so many possible uses for them. I am not joking here, these simply make too much sense...

These are all found in our Reinforcements section where we have a whole bunch of things like these http://coloradok5.com/forums/images/smilies/wink.gif

Reinforcement Plates - RuffStuff Specialties

Dan Fredrickson 06-22-2013 04:18 PM

The right tools to get you where you want to go, and back ;)

Dan Fredrickson 06-26-2013 11:44 PM

These just make sense!

Dan Fredrickson 07-01-2013 11:42 AM

Every tool box should have a double handfull of these!

Dan Fredrickson 07-18-2013 01:30 PM

Not something you will find at your local hardware store!

Dan Fredrickson 08-17-2013 12:27 PM

These are really one of the most useful things we make, check them out!

Dan Fredrickson 10-08-2013 09:56 AM

We always have the wheeler in mind ;)

Dan Fredrickson 11-07-2013 01:03 PM

All our Different Weld Washers!
 
:happyyes: A real time saver !!! :happyyes:

Dan Fredrickson 12-05-2013 01:08 PM

All our Different Weld Washers!
 
:happyyes: The right way :happyyes:

Dan Fredrickson 01-04-2014 01:16 PM

When you are dealing with a 20+ year old rig you have 50 uses for these. When dealing with a brand new rig that you don't want to start acting like its 20 years old you have even more ;)

Dan Fredrickson 01-04-2014 01:18 PM

Whether an old rig being renewed or a brand new rig being made bullet proof, these have a place in your toolbox ;)


All times are GMT -5. The time now is 06:19 PM.