Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   i need high steer trac bar (http://www.wranglerforum.com/f282/i-need-high-steer-trac-bar-25085.html)

upinar 01-12-2009 12:21 PM

i need high steer trac bar
 
for a while now ive been running the teraflex high steer kit with those aluminum drag and tie rod. back then i didnt find anything about trac bars, obviously the angles would be way of cause i moved the drag link alot higher, so i fabbed one up with ball joints on each side with a tapered mount on the axle side. Its been awesome so far, there is no room for play in the bar or steering, the thing is that im gonna get a new HP d30 and im gonna put some new sway bar mounts from teraflex that i bought and swap the gears from the old axle to the new and the high steer kit. im doing it cause the axle is beat up and the casters are bent. So now that im financially steady, i want to buy a trac bar that comes with a mount made espescially for the high steer kit instead of hacking the mount i made and use the trac bar i made. Does anyone know if there is such a thing? does a company make this? ive searched and all i can find is the skyjacker rock ready trac bar and mount, but i dont think that high enough. any ideas? thanks

flattietj 01-12-2009 01:35 PM

dont have an answer to your question but if you are planning on swapping gears from your factory tj axle to that hp30 then you are gonna be mad when you start doing it b/c they wont work.....they are different.....the hp30 uses reverse rotation.....if you already know this or already have an hp30 then disregard my posting

upinar 01-12-2009 04:45 PM

lol, thanks, i already have a HP d30.

GrnTJ 01-12-2009 06:14 PM

I believe its JKS that makes one of these but cant be positive. I know there was one for sale a few weeks ago on a local michigan forum but it sold. I cant seem to dig the thread up but try calling JKS to see if they make the mount your looking for.


All times are GMT -5. The time now is 12:52 PM.