Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   transfercase crossmember to frame bolt torque spec? (http://www.wranglerforum.com/f218/transfercase-crossmember-to-frame-bolt-torque-spec-250872.html)

94Wrangler4.0 06-21-2013 04:25 PM

transfercase crossmember to frame bolt torque spec?
 
I'm looking for the transfer case crossmember to frame bolt torque spec. Its 6 bolts.

2xs 06-21-2013 09:51 PM

I normally just hit it with an impact, a touch of medium Loctite.

Of course, Im from Cali, and we dont have rust issues here, so if you have rust issues Id go less, and probably use a lock washer instead of Loctite...

tigerblood 06-21-2013 10:18 PM

If you have rust, just get them good and snug, don't want to strip or break loose those nutserts.

OverkillYJ 06-21-2013 10:37 PM

Yeah they are simple. Just make them tight. If you strip them without a breaker bar or impact gun then you needed to replace the nutserts anyway.


All times are GMT -5. The time now is 09:56 AM.