Jeep Wrangler Forum

Jeep Wrangler Forum (
-   General Jeep Discussion (
-   -   Electrical/Lighting question (

helptomuch 06-22-2013 06:27 PM

Electrical/Lighting question
I had to splice the wires for my passenger side, side light and the signal light on that side due to damage sustained from a blown out tire. The problem is that the only way the rearlights and side lights work is when I hit the emergency light. Anybody know whats wrong?

harleydragon 06-22-2013 07:07 PM

sounds like you spliced into the wrong wires

helptomuch 06-22-2013 08:01 PM

I tried that but it didn't do anything. I don't understand why all the lights will work when I press the emergency light switch but they wont work when I turn the lights on.

harleydragon 06-23-2013 07:38 AM

I would undo what you have done...then turn the turn signal or whatever light you are looking for check the different wires available with a volt meter until you find the wire with the voltage..once you find it then turn the turn signal off and see if the voltage disappears on your voltmeter..

All times are GMT -5. The time now is 06:01 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.