Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Pictures Forum (http://www.wranglerforum.com/f115/)
-   -   Video.. Small ledge that gave me fits.. Finally made it. (http://www.wranglerforum.com/f115/video-small-ledge-that-gave-me-fits-finally-made-it-25111.html)

stinger124 01-12-2009 10:12 PM

Video.. Small ledge that gave me fits.. Finally made it.
 
This ledge was not huge, but I could not find the right line for the life of me.. To the right, it was easy, so I was working on this area, and finally made it.
YouTube - Billy's buggy at Bridgeport

wallybloke 01-12-2009 10:54 PM

Nice Jeep, looks like that thing is hooked up!

distortedtj 01-12-2009 11:00 PM

Looking awesome as always.:punk:

1BLKJP 01-13-2009 12:53 AM

Yeup looks like that nub was giving you some problems. Were you catching your driveshaft on the break over? I'd have gotten pissed and gave it a good bump with plenty of throttle. :D

AzTJ 01-13-2009 01:09 AM

That under-cut on the bottom doesn't help the situation either. :D

Still love your Juggy. :D

mr4x4 01-13-2009 01:43 AM

Quote:

Originally Posted by 1blkjp (Post 307529)
i'd have gotten pissed and gave it a good bump :d

x2

stinger124 01-13-2009 11:22 AM

Trust me... I was about at that point of giving it a good bump.:D

MR.CLIFFORD 01-13-2009 11:35 AM

do I remember reading you are welded in the rear?

stinger124 01-13-2009 01:18 PM

Spool in the rear.. Or at least thats what the guy said that I bought it from.

MR.CLIFFORD 01-13-2009 01:22 PM

Quote:

Originally Posted by stinger124 (Post 307629)
Spool in the rear.. Or at least thats what the guy said that I bought it from.

The reason I ask is it looks like there is quite a bit of slop in the rear end. You can see the rear tires moving independently a couple times in the vid. It might be a good idea to pull your diff cover and see what is going on just to be on the safe side.

EDIT: Instead of draining your fluid you can rock one of your tires back and forth. If the other side doesn't do exactly the same thing then you might have a problem. I was always leery of this as I welded up my old 8.8 and the welds broke. I still have one of the busted spider gears on my desk.

1BAMFR 01-13-2009 01:35 PM

That thing is "INSANE"

Love it

stinger124 01-13-2009 09:48 PM

Quote:

Originally Posted by MR.CLIFFORD (Post 307631)
The reason I ask is it looks like there is quite a bit of slop in the rear end. You can see the rear tires moving independently a couple times in the vid. It might be a good idea to pull your diff cover and see what is going on just to be on the safe side.

EDIT: Instead of draining your fluid you can rock one of your tires back and forth. If the other side doesn't do exactly the same thing then you might have a problem. I was always leery of this as I welded up my old 8.8 and the welds broke. I still have one of the busted spider gears on my desk.



I will check it out.. Thanks for pointing it out. I was told that it had a spool back there... Could be wrong..

stinger124 01-13-2009 09:49 PM

Quote:

Originally Posted by 1BAMFR (Post 307641)
That thing is "INSANE"

Love it


Thanks for the compliments..:cool:

Scout 01-13-2009 11:17 PM

Nice video as always. :blunt:


All times are GMT -5. The time now is 10:20 AM.