Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   What to do next??? (http://www.wranglerforum.com/f274/what-to-do-next-251117.html)

wmwhitey 06-22-2013 09:23 PM

What to do next???
 
Ok I have a 2012 jk unlimited 4" lift, set of procomp 315x12.5r17's on some procomp steel wheels, ridgid lights, on board air system with 2.5 gallon tank and many extras to go with it, front adams drive shaft, and a dynomax evolution comp exhaust. So I cant make my mind up at what I want to do next? and to add to it I have a $500 gift card from 4wheel parts in the mail to my house. and a credit card with a zero balance on it HMMMMM.


So my question to you guys is what would you do next?

Lowerumble 06-22-2013 09:26 PM

No bumpers yet?

wmwhitey 06-22-2013 09:27 PM

Not yet that is what I was thinking about.

wmwhitey 06-22-2013 09:28 PM

Poison Spyder Custom Part 17-16-030 - BFH Disco Skid Plate

Poison Spyder Custom Part 17-59-010-B - Brawler Lite Front Bumper with Brawler Bar in Bare Steel


Poison Spyder Custom Part 18-08-200 - JK Brawler Rockers in Bare Steel




This is what I have in mind to order but not sure yet?

Lowerumble 06-22-2013 09:46 PM

Do you wheel it?

wmwhitey 06-22-2013 09:49 PM

Quote:

Originally Posted by Lowerumble (Post 3889964)
Do you wheel it?



Every chance I get I was going to go on this trip but didnt make it this video is of a few guys I know.


https://www.youtube.com/watch?v=Gt2DOS7Ul1o

Lowerumble 06-22-2013 10:22 PM

I have the same rockers so I would give them a thumbs up. I like their bumpers too. Just a tip, but you can forgo the disco skid plate if you want. You can use the bolt kit from Metal Cloak to rotate the disco motor up and out of the way. Saves some cash and weight...

WatchThis! 06-22-2013 10:29 PM

The brawler rockers are good and tough. My rear fenders have been smashed in resulting in the tub being dented and rooled down to the front doors pulling it away from my rockers. The rockers are still straight as an arrow on top and only have 3 or 4 golf ball sized dents on the bottom.

wmwhitey 06-22-2013 10:30 PM

Quote:

Originally Posted by Lowerumble (Post 3890065)
I have the same rockers so I would give them a thumbs up. I like their bumpers too. Just a tip, but you can forgo the disco skid plate if you want. You can use the bolt kit from Metal Cloak to rotate the disco motor up and out of the way. Saves some cash and weight...


I dont have a Rubicon so no worries on the disco motor but where I go wheeling there are a lot of rock ledges we climb and kind of need it. The only thing I can think of if I dont go with the stuff I posted is to do a regear to 4:88's. And here in Hawaii they want $600 an axle to do a regear I think thats a little high for just a install.

wmwhitey 06-22-2013 10:32 PM

The rock sliders have you had a chance to lay the jeep on them and have to power of any rocks? I am wandering how they hold up on crushing or keeping there shape and working good?

wmwhitey 06-22-2013 10:33 PM

Quote:

Originally Posted by WatchThis! (Post 3890077)
The brawler rockers are good and tough. My rear fenders have been smashed in resulting in the tub being dented and rooled down to the front doors pulling it away from my rockers. The rockers are still straight as an arrow on top and only have 3 or 4 golf ball sized dents on the bottom.


Thanks for the info man I didnt see this till after my post. the rockers are high in price but if they are that strong then I am fine with paying for them.

WatchThis! 06-22-2013 10:58 PM

http://i147.photobucket.com/albums/r...8-24105906.jpg

http://i147.photobucket.com/albums/r...9-08181705.jpg

http://i147.photobucket.com/albums/r...9-08181720.jpg

They have been pounded on a lot more in the year since these photos were taken and are still holding up great.

wmwhitey 06-22-2013 11:02 PM

Man thats nice they look like they are worth the money. LOL you can tell when someone wheels a jeep when they see pics like that and think man that looks good. Not what the hell happened in the pics lol.

wmwhitey 06-26-2013 12:33 AM

So I pulled the trigger today I got the poison spyder bumper, skid plate for it, brawler rocker knockers and the rubber guard for it.


All times are GMT -5. The time now is 06:41 AM.