Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   2013 Jeep wrangler unlimited front license plate (http://www.wranglerforum.com/f274/2013-jeep-wrangler-unlimited-front-license-plate-254220.html)

christley 07-07-2013 05:58 PM

2013 Jeep wrangler unlimited front license plate
 
I'm trying to place a license plate in the front and it looks like there are small wholes that could place screws but not sure I don't want to ruin the bumper. Help! :confused:

Blackpony04 07-07-2013 06:08 PM

If they're dead center of the bumper those are probably the plate holes! There's no bracket or anything other than two screws that hold the plate on and on mine it was obvious the dealer simply drilled the holes. If you're in doubt look at any picture on this forum as a guide.

christley 07-07-2013 06:17 PM

Thank you I'll take a look at your pics. Still trying to learn how to navigate this site.

BadOleRoss 07-07-2013 06:39 PM

I seem to recall there being 2 small nipples on the lower area of the front bumper that I was able to line up with the lower holes in my license plate. That gave me the locations to but the upper screws in.

christley 07-07-2013 07:58 PM

Exactly. So I just place the screws there? I don't need to install anything right?

christley 07-07-2013 08:12 PM

1 Attachment(s)
Here is a picture of the bumpers. Where do I place screws and is it the regular size for the license plate screws?

Attachment 270132

sandnsaltwater 07-07-2013 08:25 PM

1 Attachment(s)
Put mine on today!

christley 07-07-2013 08:30 PM

Is it difficult do I need a drill??? What size screws should I use???

christley 07-07-2013 08:32 PM

Screws in on the top or also on the bottom??

shelbydog 07-07-2013 08:32 PM

Look in your console. There was a baggy with the screws when I bought mine.

christley 07-07-2013 08:36 PM

Didn't come with the screws oh no what do I do??

marslim 07-07-2013 08:39 PM

Quote:

Originally Posted by christley (Post 3936753)
Is it difficult do I need a drill??? What size screws should I use???

^^^ there should be a bag of screws in the console if not just ask for a few at the dealer OR any screw with an aggressive thread will work... A small pilot hole will make them bite through the plastic a little easier but it`s not neccesary

christley 07-07-2013 08:44 PM

Thank you that helps a lot : )

Up Hill Bill 07-07-2013 08:57 PM

Next time you're at the dealer, ask them to put them on for ya'. If they won't, find another dealer!

christley 07-07-2013 08:58 PM

I'll definitely do that : ) thanks

RoadiJeff 07-08-2013 07:22 AM

The salesman should have put the plates on before you drove it home, or at least the one has their dealership name all over it.

christley 07-08-2013 08:06 AM

I know right that's jeep state line dealership for you.


All times are GMT -5. The time now is 11:14 PM.