WTB '07-10 JK A-pillar cover Black OEM
I'm about to install some LED toggles on my A Pillar
and want a spare A Pillar cover just in case I crap out
or decide to relocate and get it back to stock.
Any one install an after market switch pod and want to
get rid of their '07-10 JK A-pillar cover Black OEM cover
on the cheap? Mopar has the for $20+SH
but I figured I'd ask the locals first.
I don't but I did mod mine to put in 3 rocker switches. Used a dremel. My advice is to be cautious as the dremel piece that hold the pin and cutting wheel cut into the plastic to the sides so mine are a bit beat up on the sides where my switches are. :/
I made a template and am using a drill press. But thanks for the tip.
Anyone? Still looking
|All times are GMT -5. The time now is 12:19 PM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.