Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Washington Jeep Forum (http://www.wranglerforum.com/f57/)
-   -   Elbe or Evans Sunday 7/21 (http://www.wranglerforum.com/f57/elbe-or-evans-sunday-7-21-a-255437.html)

TripleNickle 07-12-2013 10:48 PM

Elbe or Evans Sunday 7/21
 
Just installed a new transfercase and Rcv's looking to put a run together and test em out! Any one interested?

nwbronco 07-12-2013 11:09 PM

Might be. I need to crawl under mine and see what the ATF puddle is all about.


Bob K.

TripleNickle 07-13-2013 12:09 AM

Puddle?? Hopefully just dripping from the pan. An easy fix. Would be fun to wheel with you again Bob.

blueguy 07-13-2013 05:46 AM

i would be down to go hopefully with the lift if not as long as its not in the shop

nwbronco 07-13-2013 07:46 AM

Definitely a puddle. I am going to get under it tomorrow.

Bob K.

TripleNickle 07-13-2013 05:26 PM

Get it figured out Bob?

nwbronco 07-14-2013 09:42 PM

Front drive shaft is toast. Edge of transmission pan was getting smacked by the drive shaft right at the slip seam. The transmission pan and drive shaft need replacing. Hopefully the transmission housing has survived.

Hunting for parts now.

Bob K.

StumpHumper 07-15-2013 09:59 AM

Pan at dealer was cheapest and easiest when I replaced mine (believe it was 70 for pan and gasket, an extra 10 for filter and 30 for synthetic ATF), probably source front drive shaft at local junkyard.

nwbronco 07-15-2013 01:40 PM

Thanks. Local yards keep nothing in the Wrangler parts. I have found a couple on line.

Bob K.

TripleNickle 07-15-2013 11:05 PM

Quote:

Originally Posted by nwbronco (Post 3962655)
Front drive shaft is toast. Edge of transmission pan was getting smacked by the drive shaft right at the slip seam. The transmission pan and drive shaft need replacing. Hopefully the transmission housing has survived.

Hunting for parts now.

Bob K.


So that means probably a no go Sunday huh?

nwbronco 07-15-2013 11:17 PM

Not a scratch yet. Hoping to have parts by thursday.

Bob K.

TripleNickle 07-15-2013 11:25 PM

Sweet let me know I want to go out and everyone is busy I guess lol

nwbronco 07-16-2013 08:48 AM

A couple of others were planning a trip too. i will see if I can get y'all together.

Bob K.

TripleNickle 07-16-2013 03:37 PM

Yeah let do it! Let me know. Who where the others? Any one I know?

nwbronco 07-16-2013 08:16 PM

Rich and Jason. I think you have wheeled with all of us the one time. Anyways, I am right on the boarder now. I have Capitol Driveshaft looking at my driveline right now. We'll see how it goes. Six States cannot even get to it until next week.


Bob K.

TripleNickle 07-17-2013 12:46 AM

Ok I'm hoping!!!! I want to test these rcv's out!

nwbronco 07-17-2013 06:19 PM

Officially out. Local shop wants $800 to fix me up. I can order from Adam's but won't see it in time for Sunday. Dang.

TripleNickle 07-17-2013 09:46 PM

Ok dang! Lets do it soon! The others going bob ?

nwbronco 07-18-2013 09:10 AM

Haven't heard back from them.

Skawt 07-18-2013 02:09 PM

I'm on the fence for Sunday. Have a ton to do to get ready for a trip next week.

TripleNickle 07-18-2013 03:31 PM

Lets do it Scott! I bought RCV so no more broken axles or ball joints lol

TripleNickle 07-22-2013 10:02 AM

1 Attachment(s)
Here are some pics and vids great day!


20130721_123805.mp4 - YouTube


20130721_124541.mp4 - YouTube


All times are GMT -5. The time now is 11:51 PM.