Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   Engine codes (http://www.wranglerforum.com/f210/engine-codes-255564.html)

jwcom93 07-13-2013 04:23 PM

Engine codes
 
So today my 2004 jeep wrangler threw 4 codes...

P0340
P0353
P0352
P0351
Anyone know what they are?:/

jwcom93 07-14-2013 12:14 PM

Bump

phrak 07-14-2013 12:31 PM

I found this a while back.. I'm mostly certain it's for the TJ.. dunno why I would have saved it otherwise. Someone can correct me if needed

OBD2 Codes, JEEP

P0340 (M) No Cam Signal At PCM No fuel sync.
P0353 (M) Ignition Coil # 3 Primary Circuit Peak primary circuit current not achieved with maximum dwell time.
P0352 (M) Ignition Coil # 2 Primary Circuit Peak primary circuit current not achieved with maximum dwell time.
P0351 (M) Ignition Coil # 1 Primary Circuit Peak primary circuit current not achieved with maximum dwell time.

02 TJ 07-14-2013 12:47 PM

Type them into google it will tell you what they are.

jwcom93 07-16-2013 06:04 PM

Haha thank you :P turns out my cam position sensor was super loose.. Had about a quarter inch of play :/ I started the jeep, an messed with it till it sounded right, and it runs great haha


All times are GMT -5. The time now is 12:54 PM.