Jeep Wrangler Forum

Jeep Wrangler Forum (
-   Off Road and External Lighting (
-   -   led question... (

A_Kuminski 07-14-2013 08:50 PM

led question...
So I went to the local junkyard and picked up 3 15" led lights, come to find out there flashers.( like on a volunteers firefighters vehicle) My question is, is there a way to make them not flash, and just run constant?

Wranglin4Life 07-15-2013 05:19 PM

I doubt it, there meant to strobe... Having them stay on is probably not good for them even if you can get them to stay on all the time.

2footin 07-16-2013 12:21 AM

if they have more than 2 wires should be good

eboven 07-21-2013 10:01 AM

2footin is correct, if there are three wires or more on the lights, you probably have a light with selectable patterns; often times one of those patterns is steady burn. If it's a three wire setup than you usually need to pulse the third wire with a ground or positive signal while the light is powered up with the other two wires.

All times are GMT -5. The time now is 02:19 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.