Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   Clutch Fork Advice (http://www.wranglerforum.com/f218/clutch-fork-advice-25585.html)

rollmeoverplease 01-19-2009 11:50 AM

Clutch Fork Advice
 
i got my tranny in and i dont have any clutch pedal. its hard as a rock and we looked under it and the slave cylinder is trying to push away from the bell housing...... so what i wanted to know is if i had put the clutch fork in wrong..... i put it in so that the slave cylinder would fit in side of it. someone told me that it needs to be flipped around so that it just rests against..... not goes into it.

rollmeoverplease 01-23-2009 10:33 AM

i got it figured out the clip goes on the pivot ball inside the bell housing because there is enough pressure to hold the other side


All times are GMT -5. The time now is 05:45 PM.