Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Tires & Wheels (http://www.wranglerforum.com/f27/)
-   -   Stock 2013 Rubicon rims look (http://www.wranglerforum.com/f27/stock-2013-rubicon-rims-look-255871.html)

Blue Rubicon 07-15-2013 01:31 AM

Stock 2013 Rubicon rims look
 
Does anyone have any pictures of their stock JKU Rubicon rims with 33 or 35s. I would like to see the look.

I think I am going to put a 2 or 2.5 lift on my JKU.

PHILDABEAST 07-15-2013 02:22 AM

1 Attachment(s)
Here ya go. 3" lift with 35/12.50/17 using 1.75" wheel spacers.

Attachment 272986

Blue Rubicon 07-19-2013 03:02 AM

Looks good what is the overall height of your jeep at the heights point of it. I am trying to see if I can still fit my jeep in the garage. I am thinking 2.5 lift with 35s. Do the 1.75 spacers stop all rubbing and does it bring the wheel to the outside of the wheel well.

PHILDABEAST 07-19-2013 08:15 PM

The top is off the jeep right now so I can't get an exact measurement but with a little math I figure it will be about 76" at the tallest point. The the spacers don't eliminate all of the tire rub, I still had to trim the air damn a little and fully turned at full stuff it will rub the plastic fender liner at the front of the wheel well, it does not rub frame, control arms, sway bar etc. All 4 tires do stick out past the fender flares a little I'd say <1/2".

Blue Rubicon 07-26-2013 10:18 PM

Quote:

Originally Posted by PHILDABEAST (Post 3981958)
The top is off the jeep right now so I can't get an exact measurement but with a little math I figure it will be about 76" at the tallest point. The the spacers don't eliminate all of the tire rub, I still had to trim the air damn a little and fully turned at full stuff it will rub the plastic fender liner at the front of the wheel well, it does not rub frame, control arms, sway bar etc. All 4 tires do stick out past the fender flares a little I'd say <1/2".

What lift did you go with and did you do it yourself.

PHILDABEAST 07-26-2013 10:44 PM

Quote:

Originally Posted by Blue Rubicon (Post 4007802)

What lift did you go with and did you do it yourself.

Went with the 3" bds lift with the fox shock upgrade, front and rear adjustable track bars (also bds) and aev geometry correction brackets. I did all the work with help from the wife, its her jeep so I'm making sure she knows how to work on it.

gomezera 07-27-2013 03:13 AM

its her jeep so I'm making sure she knows how to work on it.http://www.oksky.us/imiss/images/24.gif


All times are GMT -5. The time now is 01:09 PM.