Jeep Wrangler Forum

Jeep Wrangler Forum (
-   YJ Tech Forum (
-   -   YJ Gauge issue (

Toddmac 07-18-2013 10:34 AM

YJ Gauge issue
Hey gang, got a question about my 95 YJ. I had the gauge cluster out a few days ago, reinstalled and noticed that at times my voltmeter and tach are both reading very low.....they will then start working. When it happens, both of them read wrong. I am thinking a ground issue however I have checked the plugs to both and they are good and all other gauges work as they should. Im a little lost on this one....I would think if its ground, I would lose everything and the same if the connectors were loose... anyone know what the common theme would be between a volt meter and a tach??

Thanks!! Todd

dukes-o-hazard 07-19-2013 03:40 AM

If you have 12+ volts to the gauges I would probably guess the tach has a short somewhere down the line..Have you check with a volt meter? What voltages are you getting? Are the connections clean?

All times are GMT -5. The time now is 12:32 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.