Jeep Wrangler Forum

Jeep Wrangler Forum (
-   General Jeep Discussion (
-   -   Seat bracket removal (

Jprather823 07-19-2013 10:01 AM

Seat bracket removal
I'm looking at taking my seats out so I can work on my flooring. Does anyone know if the screws from the bracket that bolt to floorboard have nuts underneath or can I just unscrew them. I've looked underneath and don't see bc there may be a plate over where the screw in.

Lanco 07-19-2013 10:18 AM

they do have nuts underneath. my were rusted solid. i tried removing them without properly soaking them in penetrating oil.. i snapped two bolts off (it was on of the first things i did after getting my jeep).

needless to say the brackets are now welded on. worked out pretty well. i now have anchors to strap cargo to since i never keep my rear seat in.

moral of the story: soak them bolts

Jprather823 07-19-2013 10:36 AM

So how do I get to the nuts?

Lanco 07-19-2013 12:16 PM

you can see them from the bottom. get in there with a flashlight

Jprather823 07-19-2013 12:25 PM

It's not under car is it?

jokerchief462 07-19-2013 02:01 PM

Yes it is under the Jeep called nutserts. Nuts that are attached underneath. Should be noticeable by the pattern. Soak them with PB Blaster for a few days and see what happens sometimes you just get lucky.

Jprather823 07-19-2013 02:33 PM

Ok my main concern is if I unscrew bolts would I lose my nuts underneath but it sounds like they are attached

jokerchief462 07-19-2013 04:01 PM

No they stay in place when the bolts are removed. It would be real bad to lose your nuts!!!

All times are GMT -5. The time now is 06:16 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.