Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   High setting on heater inop. (http://www.wranglerforum.com/f282/high-setting-on-heater-inop-25755.html)

Dr.Hardin 01-23-2009 09:25 AM

High setting on heater inop.
 
:banghead: When i bought this Jeep "GP" in Feb 08 I asked the dealership to fix the high setting on the heater. They swapped the switch out with a new one cause it was burned out. I am beginning to think that they change the wrong part.:bottom: Just last week the high setting started to work intermittinly, so i am thinking it is the relay and not the switch that was bad in the first place. I believe it isn't the resistor on the fan motor. Just wanting to see if I am on track with it being the relay. Thanks for the help.:D

emills 01-23-2009 01:27 PM

It is either the switch or the resistor in most cases. Here is a link with some more info on that:

http://www.wranglerforum.com/f5/heat...rol-16174.html

Eric

Dr.Hardin 01-23-2009 01:51 PM

Quote:

Originally Posted by emills (Post 312972)
It is either the switch or the resistor in most cases. Here is a link with some more info on that:

http://www.wranglerforum.com/f5/heat...rol-16174.html

Eric


Thanks the article in this write helps. appreciate it.:cool:


All times are GMT -5. The time now is 02:59 AM.