Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Builders Corner (http://www.wranglerforum.com/f118/)
-   -   how do you remove a rear corner panel on a yj? (http://www.wranglerforum.com/f118/how-do-you-remove-a-rear-corner-panel-on-a-yj-259495.html)

beardown 07-30-2013 10:32 PM

how do you remove a rear corner panel on a yj?
 
my rear corner panel is rusted pretty bad and need to replace it!! how would i go about removing the old one? thanks

nick50471 07-30-2013 11:17 PM

Sawzall or angle grinder or both. Find a donor and start cutting. You could always buy some cheap armor and cover it up like lots of other folks.

krisbman 07-31-2013 07:30 PM

Find the spotwelds first. Either drill out each spotweld or use a cut off wheel to grind each weld until you reach the panel under the weld.

beardown 08-03-2013 11:00 PM

Yea figured that was the way, thanks


All times are GMT -5. The time now is 08:17 AM.