2011 JKU canbus wiring help PLEASE
I have 2011 JKU.
I bought 2din gps navigation with built in canbus.
it has 3 wires for canbus for steering control:
black for ground
steering wheel 1 wire
steering wheel 2 wire
I have install this and everything works except controlling the steering wheel function because I dont know where to connect those 3 wires.
the stereo came with matching harness.
I have looked for the car harness diagram to find those canbus wires but cannot find any.
yes I know.
but I dont need that.
again this system comes with the harness and canbus controller.
the only thing I need to do is to find the car's canbus wires in the harness and attached those wires to it.
I just need the schematics for the car harness and the wire colors and etc...
Please anyone has the picture or the schematics?
these are the wires you need not sure what one of your specific wire goes to which one for your module
|All times are GMT -5. The time now is 01:57 PM.|
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.