Jeep Wrangler Forum

Jeep Wrangler Forum (
-   Builders Corner (
-   -   Homemade Flag Windjammer (

CommissionerGordon 08-01-2013 02:45 PM

Homemade Flag Windjammer
So there's probably already a thread out here on this but I can't find it in my phone cause my Internet at work is heavily monitored. But I'm trying to make a windjammer out of a flag that I have. If anybody could help me out with a quick and easy write up it would be greatly appreciated. Thanks a bunch!!

DFW6ER 08-01-2013 02:59 PM

I know I've seen it done here before. try searching "flag". BTW, IIRC it caused a poop-storm of controversy because several folks here got their panties in a wad over someone having the audacity to use a flag in such a way. The moderators got involved and handed out some time-outs to folks who just wouldn't let the subject drop. Personally, I'm proud of the US flag and see no problem whatsoever with using it as a windjammer.

bc3_Jeep 08-01-2013 04:10 PM

Not an issue if it is NOT modified and NOT defiled.

DFW6ER 08-01-2013 06:07 PM


Originally Posted by bc3_Jeep (Post 4028740)
Not an issue if it is NOT modified and NOT defiled.

I hear ya brother. Some folks are hypervigilant about flag protocol some less so. Doesn't mean those less so are pinko commie b@st@rds. Personally, I feel if the intent of the person is to display their love of our country then its OK. If its to degrade our country then its not ok. But my opinion is moot. The constitution says what you do with the US flag is protected under free speech. And those who died for and served/are serving our country did/do so to preserve that right.

HillbillyJeeper 08-01-2013 06:19 PM

:popcorn:And here we go......:popcorn:

GingerTJ 08-01-2013 06:21 PM

I'm interested..

Cons_Table 08-01-2013 06:33 PM

I realize it costs more (looks like you can get them for about $60)...but why not buy a premade flag windjammer? It was made specifically for the application. The other advantage to it is that is is kind of a "mesh" so you can still kind of see through it when its installed.

TeeJayy 08-01-2013 06:51 PM

I'd say just put a few grommets in and tie it off to the roll bar

Lord & Hodge 1073A-4 Grommet Kit -

CommissionerGordon 08-01-2013 06:56 PM

Yeah I'll probably just go the grommet route. I was just wondering if someone had found a different way to do it. As for the flag I'm using a "KCCO" flag from The Chive, so I won't have to worry about people hating me. Thanks a bunch. I'll be sure to post pictures when I get it all finished!

evilwhynot 08-01-2013 07:46 PM

Hm, found this online

calwick20 08-08-2013 08:35 AM

I've been trying to find out a way to use my KCCO flag for this as well

skinnywateryj 08-09-2013 03:44 PM

I really want one of these in the state of Florida flag or the "Don't Tread On Me" flag. Does anybody know if you can get one of those in the mesh stuff or get one printed. Don't really want to piss anybody off that would get upset over using a legit flag.

All times are GMT -5. The time now is 05:24 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.