my clutch master cylinder line has broken and i cant seem to find one any where.any ideas where to find one im kinda on a budget so the cheaper the better thanks
08-07-2013 12:12 AM
It's an internal slave remove the line and make one or buy one. Only choices. Where is the cheapest you will have to search it out.
08-07-2013 12:47 AM
When I had to replace my master cylinder due to leakage I had to replace master and slave cylinder as one big piece prefiled with fluid. Also is your slave cylinder outside or inside. eBay motors can point you in the right direction as far as finding prices
08-07-2013 11:40 AM
I just did this 3 days ago. The only place that had a line fir my 91 4.0 with internal slave was the stealer and a few online places. They wanted $180 ! I made my own. I carefully cut the end fittings out if the broken hose and put them into a 4 foot piece of stainless steel brake line. I put band clamps on for extra assurance. That line will never blow out as brake pressures are higher than clutch pressures. Cost me about $30 or so