Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   Two belts vs one (http://www.wranglerforum.com/f218/two-belts-vs-one-264417.html)

dguire792 08-21-2013 02:58 PM

Two belts vs one
 
My engine blew up and it had two belts that ran it and the replacement engine has one does that matter? Mine YJ is a 90 and the replacement is out of a 91 would that also matter?

ddtt225 08-21-2013 03:15 PM

the one belt sould be fine, most of the time the 2nd belt is an accessory belt that just powers one or 2 pulleys since it wasnt designed to travel the whole belt length. mine is a 95 with the original motor and it just has one drive belt.

dguire792 08-21-2013 03:26 PM

Okay sweet thanks!

Mowrangler 08-21-2013 06:12 PM

As long as they were both V belts you should be OK if it one has a flat belt it probably has a reverse rotation water pump then it wont.

Timberwolf 08-21-2013 06:58 PM

4cyl or 6?

90 was the last carb on the 4.2 6cyl, 91 went to fuel injection on a 4.0

dguire792 08-21-2013 09:51 PM

2.5 mine was a 1990 v belt and the one I got was a 1991 serpentine belt.

harleydragon 08-21-2013 09:55 PM

Quote:

Originally Posted by dguire792 (Post 4106588)
2.5 mine was a 1990 v belt and the one I got was a 1991 serpentine belt.

if the new one came with the accesories and belt already on it then you should be good to go


All times are GMT -5. The time now is 09:40 AM.