Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   HyLine fenders arived today (http://www.wranglerforum.com/f282/hyline-fenders-arived-today-266134.html)

leaver2000 08-29-2013 02:39 AM

HyLine fenders arived today
 
Should I color match electric lime green or black?

leaver2000 08-29-2013 04:03 AM

Been looking into LED markers. What ya guys think?

Mount these on the front.
http://www.amazon.com/gp/product/B00...A25AQTB3A409JE

and with an L bracket behind the front marker these for side markers.
http://www.amazon.com/gp/product/B00...A1TCFIRDGTGGJV

leaver2000 08-29-2013 04:18 AM

With these fenders I'm going to have more than enough room for 37's on my 4 inches of lift but I'm probably going to stick to 35's for the sake of my stock dana 44's and regear to 4.88. Any suggestions on a large 35 12.5X15 tire?

37's will happen when the time comes and I put together some junkyard one-tons.

cudruln 08-29-2013 08:38 AM

Color match for the win. 37s and a stretch with some one tons.

TXST8tj 08-30-2013 09:11 AM

Color match the fronts. Black for the rear flares.

I am running 35" MTRs on 2" coils + 1.25" body and with hi-lines could easily run 37s. You are not going to be happy with 35s and 4" of lift.

Imped 08-30-2013 09:24 AM

Quote:

Originally Posted by cudruln (Post 4133385)
Color match for the win. 37s and a stretch with some one tons.

You make it sound so easy.

OhSixTJ 08-30-2013 09:26 AM

Quote:

Originally Posted by TXST8tj (Post 4140161)
Color match the fronts. Black for the rear flares.

I am running 35" MTRs on 2" coils + 1.25" body and with hi-lines could easily run 37s. You are not going to be happy with 35s and 4" of lift.

What won't he be happy about?

91badass 08-30-2013 09:36 AM

1 Attachment(s)
just installed my fronts, poison spyder. Had to cut 3" off the hood. I just clear coated them and my spare tire carrier

leaver2000 08-31-2013 02:39 AM

Quote:

Originally Posted by 91badass (Post 4140817)
just installed my fronts, poison spyder. Had to cut 3" off the hood. I just clear coated them and my spare tire carrier

How are the 37's holding up on that d44? looks good, you done a flex test yet?

leaver2000 08-31-2013 02:41 AM

Quote:

Originally Posted by OhSixTJ (Post 4140577)
What won't he be happy about?

i think hes referring to the fact that i could easily fit 37's the 35's are going to look kinda small with a 4 inch lift and a high line fender.

leaver2000 08-31-2013 02:45 AM

Quote:

Originally Posted by cudruln (Post 4133385)
Color match for the win. 37s and a stretch with some one tons.

ya i think i am going to go the color match route. the most expensive part of the stretch is going to be the gas tank..

im going to start look into building the one tons within the next 6 months. I'm probaly going to do a custom width build with 4.88 gears, ARB lockers and chromoly shafts.

i would hope to keep the axle budget under 4 grand and the stretch under 2 grand.

91badass 09-03-2013 10:35 AM

1 Attachment(s)
Quote:

Originally Posted by leaver2000 (Post 4163721)
How are the 37's holding up on that d44? looks good, you done a flex test yet?

44's are off of a JK, They are gusseted , tubed inside and out. They are great, only thing ive had to do is new ball joints. No flex test yet.

NCJeepin 09-03-2013 10:58 AM

Quote:

Originally Posted by 91badass (Post 4140817)
just installed my fronts, poison spyder. Had to cut 3" off the hood. I just clear coated them and my spare tire carrier

Looks sweet man. How much lift do you have total?

91badass 09-03-2013 11:31 AM

just the 5.5 rock Krawler long arm, no spacers, no body lift.


All times are GMT -5. The time now is 08:14 AM.