Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   Help on new foglight setup (http://www.wranglerforum.com/f274/help-on-new-foglight-setup-270121.html)

Brycegreen 09-01-2013 01:13 PM

Help on new foglight setup
 
So I bought a new bumper and it doesn't have holes for factory fogs. Are there any off road lights that will plug into the stock fogs but mount like a normal off road light?

kcookuscg 09-01-2013 01:28 PM

I would like to know as well

1Topp 09-01-2013 02:48 PM

Olympic 4x4 Products 852-174 - Olympic 4x4 Products Light Pods for 07-14 Jeep® Wrangler & Wrangler Unlimited JK - Quadratec

http://www.quadratec.com/Assets/Imag.../166256-md.jpg

Brycegreen 09-01-2013 03:58 PM

Hmm that's the idea but not quite my taste

Brycegreen 09-03-2013 09:18 PM

Bump

jrussblues 09-03-2013 09:31 PM

I don't know of any lights that plug into the factory pig tail. However, if you would like the lights to come on using the factory fog light switch it is not difficult to eliminate the supplied aftermarket light switch and tap into the fog light hot wire for power.

Brycegreen 09-07-2013 09:51 AM

1 Attachment(s)
Rigid has a pair

hipshot33 09-07-2013 11:59 AM

Quote:

Originally Posted by jrussblues (Post 4263369)
I don't know of any lights that plug into the factory pig tail. However, if you would like the lights to come on using the factory fog light switch it is not difficult to eliminate the supplied aftermarket light switch and tap into the fog light hot wire for power.

that is what I am going to do to mine next week... don't know if I will just cut off the pigtail and go with spade connectors or leave it and use scotchloks ... going LED so very little current required..

Brycegreen 09-07-2013 07:13 PM

Quote:

Originally Posted by hipshot33 (Post 4369737)
that is what I am going to do to mine next week... don't know if I will just cut off the pigtail and go with spade connectors or leave it and use scotchloks ... going LED so very little current required..

Would love to hear how it goes

DaK 09-08-2013 06:46 AM

I just cut off the factory pigtail from the old lights and wired into the harness. Am sporting a pair of Rigid D2s with no issues.

2footin 09-08-2013 07:27 PM

Quote:

Originally Posted by DaK (Post 4387913)
I just cut off the factory pigtail from the old lights and wired into the harness. Am sporting a pair of Rigid D2s with no issues.

mine went in fine but had an annoying phantom flicker even for a few minutes after removing the key
cured that issue by wiring a capacitor in parallel with the light
after thinking about it I'm surprised canbus hasn't insisted on a diode to go but so far so good :happyyes:

Brycegreen 09-08-2013 09:24 PM

Quote:

Originally Posted by DaK (Post 4387913)
I just cut off the factory pigtail from the old lights and wired into the harness. Am sporting a pair of Rigid D2s with no issues.

Sweat glad to here that. Gunna order me a pair soon


All times are GMT -5. The time now is 04:47 AM.