Jeep Wrangler Forum

Jeep Wrangler Forum (
-   General Jeep Discussion (
-   -   wheel spacing (

mmohorovich 03-04-2009 11:36 PM

wheel spacing
I've got Black Pacer Daytona Wheels with LT235/75R15 goodyear extra grip workhorse tires. Is there a way to tell what size rim it is and what the spacing might be without taking the tire off? My lift is stock right now but plan on putting a Rubicon 4.5" extreme duty lift on my 95'. I believe that I'll want to widen my wheel base once I get the lift. Are these good rims or should I sell and get new?

jdhallissey 03-05-2009 01:34 AM

I would have to think they are 4.5" of back spacing. They will work fine for what you want. You can toss a 33x12.50x15 on there with your lift and it would look really good

mmohorovich 03-05-2009 03:22 AM

is there any way to measure the rim. There are no markings on them that I can tell

4Jeepn 03-05-2009 06:58 AM

Here is one way to measure.
Coker Tire Resource - How do I measure my wheel's Backspace?

As for tire size to fit on them.. I am thinking its a 7" wide rim. So say a 10.50 wide tire.

mmohorovich 03-05-2009 10:57 PM

Thanks, that helps.
Does anyone know anything about these rims or the company. Do any of you wheel with them?
Pacer Daytona Black rims

MoA 03-06-2009 12:33 AM

offset- 12mm
backspacing- 4''

google'd and found in 1 minute =D

BALLARDAdams 03-23-2009 12:25 AM

minimal backspacing puts more stress on the wheel bearings. I've seen em fail in less than 2 years with stock size tires and wheel with little backspacing. the wheel bearings are probable the weakest link in the TJ's D30
tips: don't forget to check spark plug wire loom

All times are GMT -5. The time now is 08:45 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.