Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   JK General Discussion Forum (http://www.wranglerforum.com/f274/)
-   -   Noob roll bar question (http://www.wranglerforum.com/f274/noob-roll-bar-question-277241.html)

NastyPirate 09-05-2013 12:13 PM

Noob roll bar question
 
Hey all-

Ok, so this is really humiliating to ask, but hey, I don't know any of you!

I have seen Jeeps with a 90 degree angle roll bar at the back end, and I have seen them with almost a 60 degree angle.

Is it determined by the model and year? Is the 60 an aftermarket bar?

I should have better things to do.......

dpostman 09-05-2013 12:18 PM

What you are seeing is not a roll bar. It is just the soft top frame. The OEM soft top is square at the back, Some Aftermarket tops have the "Fastback" look.

dp

98SaharaTJ 09-05-2013 12:39 PM

2 Attachment(s)
OP are you talking about roll bars like this???




Attachment 315281



Attachment 315289

NastyPirate 09-05-2013 01:35 PM

Quote:

Originally Posted by 98SaharaTJ (Post 4313025)
OP are you talking about roll bars like this???




Attachment 315281



Attachment 315289

No, that one is too stark. What I meant was what I think the #2 post refers to: a fastback type. I like that look, and would like to be able to source it but do not know what it is called. This is what it looks like (the green 2 door, post #9: http://www.wranglerforum.com/f33/tak...ff-275161.html

Scott2373 09-05-2013 01:47 PM

I believe you're referring to the difference between the 2-Door and Unlimited. The 2-Doors all have the "90 degree" roll bars and the Unlimited all have the "60 degree" bar that you refer to. This is simply how they are designed and built.

NastyPirate 09-05-2013 01:54 PM

I thought that I had seen it on a JK, as well. I am going back and forth on ordering a 2 or 4 door half-door. That one item may be the clincher!

Thanks


All times are GMT -5. The time now is 02:32 AM.