Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   Tire size help on my stock Rubicon wheels!? (http://www.wranglerforum.com/f282/tire-size-help-on-my-stock-rubicon-wheels-27871.html)

03IncaRubi 03-15-2009 09:29 PM

Tire size help on my stock Rubicon wheels!?
 
Hi guys I just have a quick question. I have a 2003 rubicon. I have a 2.5" spacer lift and a 1.25 body lift for a total of 3.5" lift. I have the stock rubicon wheels. Can I run a 285/75/16 tire on this setup with the stock rubi wheels? I was looking at the Dick Cepek mud country MT to be more specific. I was told by a few guys that they run this setup and have no issues.

I just want to know if this size tire will fit alright, without any issues? I would like to stay away from spacers. I was going to order these tonight, so any help would be greatly appreciated! Thanks!

03IncaRubi 03-15-2009 10:18 PM

Anybody running this setup? I keep searching and can't find a straight answer lol! Thanks!

03IncaRubi 03-15-2009 10:50 PM

TTT, any advice on this would be greatly appreciated! Sorry to be so annoying with this lol!

4point 03-15-2009 10:55 PM

I'm going to say yes you can do it. The 285-75 is like a 32, 11.50 and it should fit fine.

stevens243 03-15-2009 11:10 PM

Yep, just under a 33. You may get a little rubbing at full flex, but shouldn't be too bad.

snwchris 03-16-2009 05:19 AM

Yea you'll be fine... it equivalent to a 33x11.50, you might rub at full flex, but you'll be fine

Scout 03-16-2009 08:08 AM

I ran a 315/75/R16 on mine and it was fine.


All times are GMT -5. The time now is 01:47 AM.