Jeep Wrangler Forum

Jeep Wrangler Forum (
-   TJ General Discussion Forum (
-   -   Roll Bar adjustment (

1SGWBB 03-21-2009 08:03 AM

Roll Bar adjustment
Can the Roll Bar be adjusted from side to side on a 97 TJ ?

mxracer513 03-21-2009 08:29 AM

I guess it could be if you opened up the mounting holes a little. Why would you want to move your rollbar side to side?

1SGWBB 03-21-2009 08:58 AM

It's off centered to far over on drivers side and the hardtop is rubbing on it.

spanky 03-21-2009 02:26 PM

that thing been in an accident or been rolled ?

mxracer513 03-21-2009 05:48 PM

Yeah if it's bent you're going to need to straighten it not just move it over.

P.S. i think this would be an excuse for a new trail cage :D

1SGWBB 03-21-2009 06:10 PM

No accidents or rollovers that I'm aware of and the roll bar doesn't appear to be bent just off centered never noticed till I got a hardtop for it then had trouble mounting the top, passenger side has about 4 inch clearance and the drivers side is touching the side of the hardtop.

DarylJHewitt 03-22-2009 08:53 AM

Your jeep must have been in an accident, I have a 98 tj that was originally a soft top that I bought a hardtop for and my roll bars have plenty of clearance all the way around, even with the pads on.

KBR97 03-22-2009 09:41 AM

do a carfax report.

crazyredneck 03-22-2009 10:12 AM

i can give you a car fax for free if you PM me your vin, and you email address.

spanky 03-22-2009 04:12 PM

i was just gonna suggest the carfax. that thing has for sure had something bad done to it.

All times are GMT -5. The time now is 01:38 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.