Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   inner tie rod at pitman arm (http://www.wranglerforum.com/f210/inner-tie-rod-at-pitman-arm-283385.html)

bigwaynester 09-09-2013 12:21 AM

inner tie rod at pitman arm
 
it was clicking while turning, so I thought I would replace it. When I tried to take it off, the threads on the tie rod end were turning too! I put a vice grip and tried to hold it but that didn't work, so it is really broke. Also I have a right hand drive, the pitman arm is on the right side. I wonder if a stock one would fit?. I don't have a torch, maybe I can get a grinder in there?

Gold Miner 09-09-2013 12:59 AM

4" angle grinder possibly.... or maybe a Dremel with a cut-off wheel?

bigwaynester 09-09-2013 07:10 AM

Quote:

Originally Posted by Gold Miner (Post 4410457)
4" angle grinder possibly.... or maybe a Dremel with a cut-off wheel?

I will see what I can get in there. Not a lot of room. Thanks


All times are GMT -5. The time now is 04:47 AM.