Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ General Discussion Forum (http://www.wranglerforum.com/f282/)
-   -   blwer resistor block? (http://www.wranglerforum.com/f282/blwer-resistor-block-294.html)

scott 07-30-2005 01:57 AM

blwer resistor block?
 
Ineed to replace my blower resistor block. Where is it located?

Ed in North Ga. 07-30-2005 11:03 AM

Quote:

Originally Posted by scott
Ineed to replace my blower resistor block. Where is it located?

on most vehicles the fan resistor/heater coil/ect is located under/near the glovebox.

a bad one will usually only work on low speed....search the net for info-- their expensive sometimes, and theres lots of info on how to rebuild them yourself.

scott 08-05-2005 08:37 PM

thanks ed

Rocjeeper 08-10-2005 08:21 PM

Quote:

Originally Posted by Ed in North Ga.
on most vehicles the fan resistor/heater coil/ect is located under/near the glovebox.

a bad one will usually only work on low speed....search the net for info-- their expensive sometimes, and theres lots of info on how to rebuild them yourself.

Incorrect, a bad resistor block should fail to where it only works on high speed. This is a failsafe measure. If it stops working all together check the motor first along with the fuse.

dhayes 12-17-2005 10:51 AM

Just had mine fixed. Blower would only work on high. Replaced resister, works fine now.

Texapple 12-17-2005 04:31 PM

Quote:

Just had mine fixed. Blower would only work on high. Replaced resister, works fine now.

ditto, it's a quick fix

Hunter9 01-07-2006 07:25 PM

Depending on the year, I believe the older Tjs had the resistor in the heater box on the passenger side floor.


All times are GMT -5. The time now is 11:09 AM.