Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   TJ Tech Forum (http://www.wranglerforum.com/f210/)
-   -   quick disconnects (http://www.wranglerforum.com/f210/quick-disconnects-29699.html)

arazs 04-26-2009 08:03 PM

quick disconnects
 
who has the best idea to make their own quick disconnects, or does it matter enough that i should buy the jks quicker disconnects...i look forward to the ideas

Jma20a 04-26-2009 09:10 PM

Jeep Homemade Swaybar Disconnects

pyro 04-26-2009 10:42 PM

good info. Thanks

cnolan76 04-26-2009 10:52 PM

Has anyone used this homemade setup? I've been thinking about it for a while but didn't think it looked too reliable.

350chevrolet 04-26-2009 10:54 PM

putting a pin in the bottom on the link was exactly what i was going to say.

4point 04-26-2009 10:57 PM

I would buy the RE or JKS units. The pin that the link attaches to should be rigid. Thats why the home made units wear out the pin and/or ruin the lower link bushing.

Jma20a 04-27-2009 11:44 AM

i did the make your own disco's and they work fine, they have a tight fit and don't rattle at all, all the parts are grade 8 or better.


All times are GMT -5. The time now is 02:16 AM.