Who makes good ones?
smooth strong steel that fit right.
05-05-2009 10:45 AM
05-05-2009 10:50 AM
is this to cover a hit or to help prevent one?
05-05-2009 11:21 AM
Warrior makes a smooth corner guard that isn't excessively heavy like some are, that's what is on my TJ. If you go with them, use stainless steel pop-rivets instead of the aluminium pop-rivets included in the kit. Aluminum pop-rivets are too soft for this application and will eventually fail. :)
05-05-2009 11:54 AM
To what jerry said The ones I am using have grade 8 bolts that are recessed. Genright I think make a good set. I am going to also run a metal strip to hold in the body for the just in case getting cuaght.
05-05-2009 12:00 PM
X2 Rokmen, Gen-Right or Treks
05-05-2009 12:05 PM
RokMen and Genright are about the only one's left that I can think of.
Mine are PSC and they've held up fine but, or course, PSC is no longer around.
05-05-2009 12:15 PM
I heard on the website they are under new ownership and coming back.
05-05-2009 12:21 PM
^ On there website do they have a talking puppet or did you read it:p:D
It's to prevent one but also to add strength to the area for mounting an Or-fab style spare tire and gas can carrier.
05-06-2009 05:20 AM
Check out EBAY, I just bought some Aluminum Diamond plate rear corners, a strip for under the tailgate and a set of side diamond plate under door protectors for $139 bucks shipped. Its 16 gauge aluminum, so it is pretty strong. I will let you know how they fit iin a few weeks. The store is