Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   Classifieds Archive (http://www.wranglerforum.com/f135/)
-   -   New Vendor here wanted to introduce some of our stuff (http://www.wranglerforum.com/f135/new-vendor-here-wanted-to-introduce-some-of-our-stuff-31232.html)

rock4xfab 05-28-2009 12:13 PM

New Vendor here wanted to introduce some of our stuff
 
Rock 4x Fabrication,Inc Located In Waukegan just south of the Illinois Wisconsin Border.
Just wanted to throw up some product and pricing of a few lift kits we have in stock.
Feel free to call or email with any questions and if you are in the area stop by. My name is Scott and I am the owner/Fabricator
We specializie in custom stuff but also do the bolt in..

4" 07-09 BDS JK lift
[H564] $1,407.51


4-1/2" 4WD Jeep Wrangler JK Rubicon - 4-Door

Front 4.5" Coil Springs
Rear 4.5" Coil Springs

This kit comes with four new Pro-Ride coil springs capable of full coil bind, bump stop extensions, front extended sway bar links, rear solid sway bar links, pitman arm, front and rear track bar relocation brackets,brake line relocation, front and rear lower control arms and rear upper adjustable control arms to properly center the wheel.

Max. Tire Size: 37 x 12.50
Max. Wheel Size: 17 x 9
Back Spacing: 4.5"

Est. Installation: 6 hours
Difficulty Level (easy 1 - 5 complicated): 2

https://www.rock4xfabrication.com/st...4.5%20lift.jpg


NEW Zone offroad Proudly made here in

JK 07-09 3" Suspension System
[3" JK 07-09 ] $439.99



Features
Coil springs designed to give a full 3" of lift while maintaining a factory style ride. Our coils are 2door/4door specific, so be sure to select the proper application.
Rear extended sway bar links are included. These links come with urethane bushings to increase performance and reduce body roll. The factory rear links are then used in the front.
A rear track bar relocation system is included to perfectly center the axle under your JK
2" bump stop extensions are included to protect your vehicle while still increasing wheel travel
Brake line relocation brackets are supplied to allow for the dramatic increase in wheel travel
New Zone front and rear shocks are included that are valved specifically for your JK
Notes
This system works for the 2 door, 4 door and Rubicon models. The coils are specific for 2 door vs. 4 door, so be sure to select the correct model.

https://www.rock4xfabrication.com/st...203%20lift.jpg


TJ 03-06 4" Suspension lift
[4" TJ Suspen] $529.99



Features
Four new Zone coils are included that are capable of being fully smashed down and they will always come back to their original height. Front and rear extended sway bar links are included. These links come with urethane bushings to increase performance and reduce body roll. A rear track bar relocation system is included to perfectly center the axle under your TJ.
A minimal transfer case drop is supplied to correct the driveline angle while maintaining as much ground clearance as possible. 2" bump stop extensions are included to protect your vehicle while still greatly increasing wheel travel
Four new massive lower control arms are included. These greasable arms are made from 1-3/4" x 1/4" wall DOM tubing!
New rear pinion cam plates are included to rotate the rear pinion for proper drive line angles.
The system is completed with 4 new Zone shocks that are specifically valved for your TJ to perform well both on and off road

Installation skill level: 3 of 5
Estimated install time: 6 hrs
Max tire size: 33 x 12.50
Wheel size: 15 X 8
Back spacing: 3.5"

http://i10.photobucket.com/albums/a1...Jeepflexed.jpg

rock4xfab 05-28-2009 12:31 PM

Custom work
Cage
http://i10.photobucket.com/albums/a1...merawebadd.gif
Rockwell Panhard bracket
http://i10.photobucket.com/albums/a1...iscpics063.jpg
Toyota Exo
http://i10.photobucket.com/albums/a1...a/IMG_0912.jpg
http://i10.photobucket.com/albums/a1...a/IMG_0896.jpg

And if you are into Nostalgic Rods
http://i10.photobucket.com/albums/a1...r/IMG_1525.jpg
1 off Xtera sliders
http://i10.photobucket.com/albums/a1...b/IMG_0206.jpg

http://i10.photobucket.com/albums/a1...merawebadd.gif

http://i10.photobucket.com/albums/a1.../kimera872.jpg

rock4xfab 05-28-2009 12:39 PM

Welding capabilitys

Mig weld
http://i10.photobucket.com/albums/a1...b/IMG_1059.jpg

http://i10.photobucket.com/albums/a1...b/IMG_1232.jpg

Swing out carrier anyone
http://i10.photobucket.com/albums/a1...b/IMG_1050.jpg


Some remachining and repair of High steer arms
http://i10.photobucket.com/albums/a1...b/IMG_1075.jpg

design work,, New JK D-Ring Mounts
http://i10.photobucket.com/albums/a1...levismount.gif

4point 05-28-2009 12:45 PM

Nice Fab-work. :punk: Welcome again rock4xfab guy. :wavey:

ccain 05-28-2009 01:10 PM

Hell yeah! Mad skills! Welcome! :wavey:

Scout 05-28-2009 01:53 PM

Welcome aboard!

1BLKJP 05-28-2009 04:09 PM

Glad to have you on board Scott. This board has matured to the point where I think some of the guys will definitely be interested in some of the things you are doing. Sport cages and cage replacements definitely come to mind. Do you have anything like that in a shippable kit format?

jpdocdave 05-28-2009 04:42 PM

scott's been a friend of mine for a long time, the pictures speak for themselves. you can count on whatever he makes and/or says. he's good people, and obviously crazy talented.








was that good enough, can i have my 20 bux now???:D

1BLKJP 05-28-2009 05:21 PM

Quote:

Originally Posted by jpdocdave (Post 379213)
scott's been a friend of mine for a long time, the pictures speak for themselves. you can count on whatever he makes and/or says. he's good people, and obviously crazy talented.

was that good enough, can i have my 20 bux now???:D

Yeah, but Scott told me that after he pays you 50% of it comes to me as a kickback for letting him on the board. :D

jdhallissey 05-28-2009 11:56 PM

No no no you both have it wrong I have brought him more business then both you combined lol I win -- scott is the man for most stuff. Dave does the "OTHER" :p

1BLKJP 05-29-2009 02:47 AM

Hey Scott, you all have any 1 5/16th OD layin around?


All times are GMT -5. The time now is 04:21 AM.