Jeep Wrangler Forum

Jeep Wrangler Forum (http://www.wranglerforum.com/)
-   YJ Tech Forum (http://www.wranglerforum.com/f218/)
-   -   95 Rear Frame hole thread size (http://www.wranglerforum.com/f218/95-rear-frame-hole-thread-size-313353.html)

Daysailor 09-26-2013 05:31 PM

95 Rear Frame hole thread size
 
There is a set on threaded holes on the bottom side of the frame rails by the rear bumper. Anyone know the thread size? I'm assuming its metric.

bajonesy77 09-26-2013 07:12 PM

Its 7/16 just got some for mine, I tried 12mm first and they were loose so I ran a tap thru it cause it had a good bit of rust in it and 7/16 is perfect on my 94.

Daysailor 09-26-2013 09:51 PM

Perfect! Thanks. Your right, I think it was the heavy rust that was throwing me off. A little PB Blaster did the trick.


All times are GMT -5. The time now is 09:36 AM.